Follow these steps to become familiar with your server
documentation and to complete your installation successfully.
GETTING STARTED!
1
Checking the Accessory Box
3
Installing Your Server
4 Running the EXPRESSBUILDER CD-ROM
Note: EXPRESSBUILDER does not support FT Linux installation.
The accessory box contains:
❏ Follow the Server Setting Up information in your User’s Guide to
unpack and install your server.
❏ Boot the EXPRESSBUILDER CD-ROM to:
ƒ Prepare your server for operating system installation.
ƒ Re-install Windows 2000 Advanced Server.
ƒ Keys for the LOCKED front door**
❏ If your server includes Operating System software preloaded at the
factory, it will boot-up to the operating system license agreement
screen. Follow the screen prompts and Software Notes to complete
loading of your operating system.
ƒ EXPRESSBUILDER bootable CD-ROM containing setup utilities,
maintenance tools and system documentation.
ƒ Customer Notices,* Alerts,* Software Notes,** and System
ƒ Run EXPRESS5800 utilities independently of the operating
Release Notes
system.
❏ Options ordered with your server are already installed. If you have
additional adapter boards and devices for your server, install them
before putting the server in the location you have selected. Follow
the procedures in the Upgrades and Options chapter of the system
User’s Guide, plus installation inserts and vendor documents that
came with the option.
ƒ Network Operating System (NOS) software**
ƒ Application Software**
ƒ Run utilities to ensure correct hardware setup if you installed
additional adapter boards or devices in Step 3.
‰ Autorun the EXPRESSBUILDER CD-ROM under Windows to:
ƒ Power cord(s), keyboard, and mouse
ƒ Service and Warranty information.
ƒ Read/print documentation and install Adobe Acrobat Reader.
ƒ Install ESMPRO, or Management Workstation Application
(MWA) or make an OEM diskette.
ƒ Link to the NEC Express5800 web site.
Note: If you received system diskettes with your server, these diskettes
provide the latest available system utilities information. Use these
diskettes instead of running the system utilities from the
EPRESSBUILDER CD-ROM.
*If required for your server.
**On certain models.
1
COMM 1
COMM 2
2
1
2
Your System Documentation
2
❏ You may view and print user’s guides for your Server, ESMPRO, MWA
and EXPRESSBUILDER from the EXPRESSBUILDER CD-ROM. To
do this, insert the CD-ROM into the CD-ROM device on a system
running a Microsoft® Windows® Operating System (Do not boot from
the EXPRESSBUILDER CD-ROM.) At the main menu, Select Online
Document – Library. Use the Adobe® Acrobat® PDF viewer to view
and print the user’s guides. If you do not have Adobe Acrobat PDF
viewer, select Setup – Adobe Acrobat on the CD-ROM to install the
reader.
5
Installing Application Software
❏ Locate application software media and accompanying installation
procedures. Install application software following procedures in the
applicable installation guide.
Typical Server Connections
❏ If your Network Administrator advises, install your server
management software using the EXPRESSBUILDER CD-ROM.
Your server installation is complete.
❏ Read the System Release Notes. The System Release Notes provide
the latest available system information.
❏ Read the Software Notes. The Software Notes provide information on
Need More Help?
configuring and running software preloaded on your system.
Please call the Technical Support number included with
the Service and Warranty information.
|